En 1972, DEAN MARKLEY débute son travail énorme et acharné sur l'essence même du son des guitares. Quel est le premier élément à se mettre en vibration sur une guitare ? La corde. Ses efforts sont vite récompensés en donnant naissance à une gamme exceptionnelle de produits dans la chaine complexe du son des guitares. DEAN MARKLEY sollicite Mr. GREG FARRES, célèbre designer Américain d'amplificateurs. Convaincu, ce dernier rejoint la team "Dean Markley Electronics".
Pour plus d’information, contactez nous au 04.37.90.25.22 ou par e-mail à contact@backline-pianos.com
209,00€
ou 3x 69,67€
+écotaxe 0,30€
Garantie :
2 an(s)
Disponibilité :
Tarif livraison :
7,50€ OFFERTS
Frais de livraison offerts
EN STOCK FOURNISSEUR - habituellement livré sous 5-7 jours selon disponibilité de la marque
ULTRASOUND AG-30
ULTRASOUND AG-30
Fiche technique ULTRASOUND AG-30
HEADPHONES: This jack provides a stereo signal to drive headphones. The use of this jack will disengage the amplifiers internal speaker.
INPUT: Input designed for Instrument level (1/4") signals.
EFX SEND: Output for supplying signals to external low-level effects or signal processing equipment.
EFX RETURN: Input for returning signals from external low-level effects or signal processing equipment
VOLUME: Controls the overall volume of the amp.
BASS: Adjusts the amount of cut or boost in the low frequency range.
TREBLE: Adjusts the amount of cut or boost in the high frequency range.
NOTCH FILTER HZ: Provides selectable frequency shift of the 18db cut NOTCH FILTER from 100Hz - 350Hz to eliminate resonant feedback.
NOTCH FILTER ON/OFF: -This toggle switch enables or disables the notch filter control.
SHAPE ON/OFF: This toggle switch enables or disables the SHAPE control. The shape control is a mid dip control. In the on position the mid frequencies will be cut and the high and low frequencies will be boosted.
POWER: This rocker switch turns the AC power On and Off. When on the pilot light is illuminated to indicate the unit is ready for play.
AC INPUT: Connect the female end of the AC line cord here. Connect the male plug to a suitable source of line voltage. Refer to the voltage information on the back of the amplifier for its voltage and current requirements. This connector also acts as the main fuse holder and includes a compartment for a spare fuse.
LINE OUT: This jack provides an unbalanced out put from the preamp that is post eq and post efx. This send can be used to feed a signal to a recording or sound reinforcement mixer. Additionally this output can be used to drive a slave amp such as the ULTRASOUND AG-50E.
DIRECT OUT: This XLR jack provides a balanced output signal that is post eq, used to feed recording or sound reinforcement equipment.
